Filtering The Event Logbook; Overview Of Information Events - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Diagnostics and troubleshooting
88
A maximum of 20 event messages can be displayed in chronological order. If the advanced
HistoROM function is enabled in the device (order option), up to 100 entries can be displayed.
The event history includes entries for:
• Diagnostic events (® ä 84)
• Information events (® ä 88)
In addition to the operation time of its occurrence, each event is also assigned a symbol that indicates
whether the event has occurred or is ended:
• Diagnostics event
– : Event has occurred
– : Event has ended
• Information event
: Event has occurred
Calling up and closing remedial measures
1. Press F.
à The message for the remedial measures for the selected diagnostic number opens.
2. Press S + O simultaneously.
à The message about the remedial measures closes.
• For the structure of the remedial measure message (® ä 82)
• For filtering the displayed event messages (® ä 88)
12.8.2

Filtering the event logbook

Using the Filter options parameter, you can define which category of event messages is displayed
in the Events list submenu.
Navigation path
"Diagnostics" menu ® Event logbook ® Filter options
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)
12.8.3

Overview of information events

Unlike a diagnostic event, an information event is displayed in the event logbook only and not in
the diagnostic list.
Information event Event text
I1000 -------- (device ok)
I1079 Sensor changed
I1089 Power on
/ ../Eventlist
I1091 Config. change
I1157 Mem.err. ev.list
0d01h19m10s
F311 Electr. failure
Proline Prosonic Flow B 200 HART
F
Endress+Hauser
A0014008-EN