Defining The Tag Name; Setting The System Units - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
Endress+Hauser
10.5.1

Defining the tag name

To enable fast identification of the measuring point within the system, you can enter a unique
designation using the Device tag parameter and thus change the factory setting.
Navigation path
Setup ® Advanced setup ® Device tag
User entry
Max. 32 characters, such as letters, numbers or special characters (e.g. @, %, /)
In the factory configuration, the tag name appears at the top left in the header.
1
1 Device tag
The number of characters displayed depends on the characters used.
10.5.2

Setting the system units

In the System units submenu, you can configure the units of all measured values.
Navigation path
"Setup" menu ® Advanced setup ® System units
Structure of the submenu
System units
Display ®
®
Conf. backup disp.
XXXXXXXXX
®
Volume flow unit
Volume unit
Corrected volume flow unit
Corrected volume unit
Temperature unit
Pressure unit
Energy flow unit
Energy unit
Calorific value unit
Velocity unit
Commissioning
(® ä 65)
(® ä 66)
A0013375
61