17.13 Application Packages; 17.14 Accessories - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
C-Tick symbol
Ex approval
Pressure Equipment Directive
Other standards and guidelines
Endress+Hauser
The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
The devices are certified for use in hazardous areas and the relevant safety instructions are provided
in the separate "Safety Instructions" (XA) document. Reference is made to this document on the
nameplate.
• With the PED/G1/I or II marking on the sensor nameplate, Endress+Hauser confirms compliance
with the "Essential Safety Requirements" specified in Annex I of the Pressure Equipment Directive
97/23/EC.
• Devices not bearing this marking (PED) are designed and manufactured according to good
engineering practice. They meet the requirements of Art.3 Section 3 of the Pressure Equipment
Directive 97/23/EC. The range of application is indicated in tables 6 to 9 in Annex II of the
Pressure Equipment Directive 97/23/EC.
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
• IEC/EN 61326
Emissions in accordance with Class A requirements. Electromagnetic compatibility (EMC
requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 32
Data retention in the event of a power failure in field and control instruments with microprocessors
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with analog
output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 80
The application of the pressure equipment directive to process control devices
• NAMUR NE 105
Specifications for integrating fieldbus devices in engineering tools for field devices
• NAMUR NE 107
Status classification as per NE107
• NAMUR NE 131
Requirements for field devices for standard applications

17.13 Application packages

For an overview of the application packages that can be ordered, see the "Technical Information"
document

17.14 Accessories

For an overview of the accessories that can be ordered, see the "Technical Information"
document
Technical data
105