Other Settings - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

System integration
46
• Expert ® Communication ® HART output ® Output ® Assign PV
• Expert ® Communication ® HART output ® Output ® Assign SV
• Expert ® Communication ® HART output ® Output ® Assign TV
• Expert ® Communication ® HART output ® Output ® Assign QV
The following measured variables can be assigned to the dynamic variables:
Measured variables for PV (primary dynamic variable)
• Volume flow
• Corrected volume flow
• Corrected methane volume flow
• Energy flow
• Methane fraction
• Gross calorific value
• Wobbe index
• Temperature
Measured variables for SV, TV, QV (secondary, tertiary and quaternary dynamic variable)
• Volume flow
• Corrected volume flow
• Corrected methane volume flow
• Energy flow
• Methane fraction
• Gross calorific value
• Wobbe index
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
9.3

Other settings

In the Configuration submenu, you can configure other settings for the HART protocol (e.g. Burst
mode)
Navigation path
"Expert" menu ® Communication ® HART output ® Configuration
For an overview and description of the parameters of this menu, refer to the document
"Description of Device Parameters"
Proline Prosonic Flow B 200 HART
Endress+Hauser