Product Identification; Transmitter Nameplate - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Incoming acceptance and product identification
12
4.2

Product identification

The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is displayed.
For an overview of the scope of the Technical Documentation provided, refer to the following:
• The "Additional standard documentation on the device" (® ä 7) and "Supplementary device-
dependent documentation" (® ä 7) sections
• The W@M Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
4.2.1

Transmitter nameplate

1
2
Order code:
Ser. no.:
Ext. ord. cd.:
6
7
8
9
å 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number
5 Extended order code
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Type of cable glands
8 Permitted ambient temperature range (T
9 Firmware version (FW) and device revision (Dev.Rev.) from the factory
10 CE mark, C-Tick
11 Additional information on version: certificates, approvals
12 Permitted temperature range for cable
13 Manufacturing date: year-month
14 Degree of protection
15 Explosion protection approval information
16 Document number of safety-related supplementary documentation
17 2-D matrix code
3 4 5
Date:
12
10 11
)
a
Proline Prosonic Flow B 200 HART
i
i
Patents
322540-0001
13
Endress+Hauser
14
15
16
17
A0013906