Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual page 85

Proline Prosonic Flow B 200 HART
Endress+Hauser
261 Electronic modules
262 Module connection
270 Main electronic failure
271 Main electronic failure
272 Main electronic failure
273 Main electronic failure
275 I/O module failure
276 I/O module failure
282 Data storage
283 Memory content
311 Electronic failure
311 Electronic failure
* Diagnostic behavior can be changed: Section 12.4 "Adapting diagnostic behavior"
Diagnostic
Short text
number
Diagnostics for the configuration
410 Data transfer
411 Up-/download active
431 Trim
437 Incompatible
configuration
438 Dataset
441 Current output 1-2
452 Calculation error
1. Restart device.
2. Check electronic modules.
3.Change I/O Modul or main
electronics.
1. Check module connections.
2. Change electronic modules.
Change main electronic module.
1. Restart device.
2. Change main electronic module.
1. Restart device.
2. Contact service.
1. Emergency operation via display.
2. Change main electronics.
Change I/O module.
1. Restart device.
2. Change I/O module.
1. Restart device.
2. Contact service.
1. Transfer data or reset device.
2. Contact service.
1. Transfer data or reset device.
2. Contact service.
Maintenance required!
1. Do not perform reset.
2. Contact service.
Remedial measures
1. Check connection.
2. Retry data transfer.
Up-/download active, please wait
Carry out trim.
1. Restart device.
2. Contact service.
1. Check data set file.
2. Check device configuration.
3. Up- and download new
configuration.
1. Check process.
2. Check current output settings.
1. Check device configuration.
2. Check process conditions.
Diagnostics and troubleshooting
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
M Warning
Status
signal Diagnostic behavior
from the from the factory
factory
F Alarm
C Warning
C Warning
F Alarm
M Warning
*
S Warning
*
S Alarm
85