Input Terminal Function Selection - Mitsubishi Electric 800 Series Instruction Manual

12.6

Input terminal function selection

Use the following parameters to select or change the input terminal functions.
Pr. Name
178 STF/DI0 terminal
T700 function selection
179 STR/DI1 terminal
T701 function selection
180 RL terminal function
T702 selection
181 RM terminal function
T703 selection
182 RH terminal function
T704 selection
183 MRS terminal
T709 function selection
184 RES terminal
T711 function selection
185 NET X1 input
T751 selection
186 NET X2 input
T752 selection
187 NET X3 input
T753 selection
188 NET X4 input
T754 selection
189 NET X5 input
T755 selection
Pr. Name
699
Input terminal filter
T740
*1 The initial value is for standard models.
*2 The initial value is for the Ethernet model and the safety communication model.
*3 The setting range differs depending on the model. For more information, refer to the parameters available for each signal.
 Input terminal function assignment
• Signals can be input to the inverter by using physical terminals (except for the FR-E800-SCE) or via communication.
• Use the following parameters to assign functions to input terminals. Check the terminal available for each parameter.
Terminal
Pr.
name
178 STF/DI0
179 STR/DI1
180 RL
181 RM
182 RH
183 MRS
184 RES
185 NET X1
186 NET X2
187 NET X3
188 NET X4
189 NET X5
○: Assignment/input available, ─: Assignment/input unavailable (no function)
292
12.(T) Multi-Function Input Terminal Parameters
12.6 Input terminal function selection
Initial
value
60 STF (Forward rotation command)
61 STR (Reverse rotation command)
0 RL (Low-speed operation command)
1 RM (Middle-speed operation command)
2 RH (High-speed operation command)
24 MRS (Output stop)
*1
RES (Inverter reset)
62
*2
No function
9999
9999 No function
9999 No function
9999 No function
9999 No function
9999 No function
Initial
Setting range
value
5 to 50 ms
9999
9999
External input terminal (physical terminal)
FR-E800 FR-E800-E
○ (STF) ○ (DI0)
○ (STR) ○ (DI1)
○ —
○ —
○ —
○ —
○ —
— —
— —
— —
— —
— —
Initial signal
0 to 5, 7, 8, 10, 12, 14 to 16, 18, 24 to 27, 30, 37,
46, 47, 50, 51, 60, 62, 65 to 67, 72, 92, 9999
0 to 5, 7, 8, 10, 12, 14 to 16, 18, 24 to 27, 30, 37,
46, 47, 50, 51, 61, 62, 65 to 67, 72, 92, 9999
0 to 5, 7, 8, 10, 12, 14 to 16, 18, 24 to 27, 30, 37,
46, 47, 50, 51, 62, 65 to 67, 72, 92, 9999
0 to 4, 8, 14, 15, 18, 24, 26, 27, 30, 37, 46, 47,
50, 51, 72, 92, 9999
Set the time delay for the input terminal response.
No filter for the input terminal
Input via
communication
FR-E800-SCE
Forward rotation
—
command only
Reverse rotation
—
command only
— ○
— ○
— ○
— ○
— ○
— ○
— ○
— ○
— ○
— ○
Setting range
Description
*1
*3