Mitsubishi Electric 800 Series Instruction Manual page 311

Pr. Name
298 Frequency search
A711 gain
450 Second applied
C200 motor
453 Second motor
C201 capacity
454 Number of second
C202 motor poles
51 Second electronic
C203 thermal O/L relay
456 Rated second motor
C204 voltage
457 Rated second motor
C205 frequency
744 Second motor
C207 inertia (integer)
745 Second motor
C208 inertia (exponent)
Second motor auto
463
tuning setting/
C210
status
458 Second motor
C220 constant (R1)
459 Second motor
C221 constant (R2)
Second motor
460
constant (L1) / d-
C222
axis inductance (Ld)
Second motor
461
constant (L2) / q-
C223
axis inductance (Lq)
462 Second motor
C224 constant (X)
455 Second motor
C225 excitation current
Second motor
860 torque current/
C226 Rated PM motor
current
Second motor
starting resistance
741
tuning
C282
compensation
coefficient 1
Starting resistance
737 tuning
C288 compensation
coefficient 2
560 Second frequency
A712 search gain
*1 The setting range for the 575 V class is "0, 3, 5, 6, 10, 13, 15, 16, 8090, 8093, 9090, and 9093".
310
13.(C) Motor Constant Parameters
13.2 Offline auto tuning
Initial
Setting range
value
0 to 32767
9999
9999
0, 3, 5, 6, 10, 13, 15, 16, 20,
23, 40, 43, 50, 53, 70, 73,
*5
1800 , 1803, 8090, 8093,
9999
*1
9090, 9093
9999
0.1 to 30 kW
9999
9999
2, 4, 6, 8, 10, 12
9999
9999
0 to 500 A
9999
9999
200/400/
0 to 1000 V
*3
575 V
10 to 400 Hz
9999
9999
9999 10 to 999, 9999
9999 0 to 7, 9999
0
1
0
11
*4
9999
0 to 50 Ω, 9999
*4
9999
0 to 50 Ω, 9999
9999
0 to 6000 mH, 9999
9999
0 to 6000 mH, 9999
9999
0% to 100%, 9999
*4
9999
0 to 500 A, 9999
*4
9999
0 to 500 A, 9999
9999 0% to 200%, 9999
9999 0% to 200%, 9999
0 to 32767
9999
9999
The offline auto tuning automatically sets the gain required for
the frequency search.
The constant value of Mitsubishi Electric motor (SF-PR, SF-JR,
SF-HR, SF-JRCA, SF-HRCA, GM-[], or GM-[]P) is used.
Set this parameter when using the second motor
(the same specifications as Pr.71).
The function is disabled.
Set the capacity of the second motor.
V/F control
Set the number of poles of the second motor.
V/F control
This function is enabled when the RT signal is ON.
Set the rated motor current.
Second electronic thermal O/L relay disabled.
Set the rated voltage (V) of the second motor.
Set the rated frequency (Hz) of the second motor.
The Pr.84 Rated motor frequency setting is used.
Set the inertia of the second motor.
9999: The constant value of Mitsubishi Electric motor (SF-PR,
SF-JR, SF-HR, SF-JRCA, SF-HRCA, GM-[], or GM-[]P) is
used.
No auto tuning for the second motor.
Offline auto tuning is performed without the second motor
rotating.
Offline auto tuning is performed without the second motor
rotating (under V/F control). (Refer to
*4
*4
*4
Tuning data of the second motor.
(The value measured by offline auto tuning is automatically
set.)
9999: The constant value of Mitsubishi Electric motor (SF-PR,
SF-JR, SF-HR, SF-JRCA, SF-HRCA, GM-[], or GM-[]P) is
used.
The offline auto tuning automatically sets the gain required for
the frequency search of the second motor.
The constant value of Mitsubishi Electric motor (SF-PR, SF-JR,
SF-HR, SF-JRCA, SF-HRCA, GM-[], or GM-[]P) is used for the
second motor.
Description
page 369.)