Mitsubishi Electric 800 Series Instruction Manual page 24

 Basic operation (Ethernet model and safety communication model)
Operation mode switchover/Frequency setting
Network operation mode (at power-ON)
*1
First screen (Output frequency
*2
Parameter clear
*1 For the details of operation modes, refer to
*2 The monitor item can be changed. (Refer to
*3 Not displayed for the 575 V class.
*4 For the details of the fault history, refer to the Instruction Manual (Maintenance).
 Parameter setting mode
In the parameter setting mode, inverter functions (parameters) are set.
PU operation mode
Blinking
Change the setting.
Second screen
monitoring)
(Output current
PU operation mode
The present setting is
displayed.
All parameter clear
Group parameter setting
(Example)
Blinking
Fault record 1
The last ten fault records can be displayed.
When the fault history is empty, only the fault number is displayed.
page 180.
page 234.)
*1
Frequency setting written and complete
monitoring)
*2
Change the setting.
Fault history clear
Automatic parameter setting
(Example)
Blinking
Fault record 2
*4
PU Jog operation mode
*1
Third screen
(Output voltage monitoring)
*2
Blinking
Parameter write complete
Initial value change list
PM initialization
*3
(Example)
Blinking
Fault record 10
*4 *4
2. Basic Operation
2.1 Operation panel
1
2
3
4
5
6
7
8
9
10
23