Mitsubishi Electric 800 Series Instruction Manual page 75

*4 Differs depending on the capacity.
6%: FR-E820-0015(0.2K) or lower and FR-E820S-0015(0.2K) or lower
4%: FR-E820-0030(0.4K) or higher, FR-E840-0016(0.4K) or higher, and FR-E820S-0030(0.4K) or higher
1%: FR-E860-0017(0.75K) or higher
*5 On the LCD operation panel used as the command source, the parameter number in parentheses appears instead of that starting with the letter C.
*6 For the Ethernet model and the safety communication model, the setting is available only when the FR-A8AY is installed.
*7 For details, refer to the Instruction Manual (Communication).
*8 Available when the PLC function is enabled. (Pr.313 to Pr.315 are always available for settings in the Ethernet model and the safety
communication model.)
*9 For the standard model, the setting is available only when a communication option is installed.
*10 For details, refer to the FR-E800-SCE Instruction Manual (Functional Safety).
74
3. Parameters
3.2 Parameter list (by parameter number)