Mitsubishi Electric 800 Series Instruction Manual page 25

The following table explains the indications in the parameter setting mode.
Operation panel indication
2.1.3 Digital characters and their corresponding printed
equivalents
Digital characters displayed on the operation panel display are as follows.
2.1.4 Changing the parameter setting value
• Select the parameter number in the parameter setting mode and press the SET key to change the parameter setting value.
• After changing the parameter setting value, press the SET key to write the setting value to the inverter.
• When the parameter number is 4-digit, "Pr." and the parameter number are displayed alternately.
• When the parameter number is 5-digit, the upper 1 digit and the lower 4 digits of the parameter number are displayed
alternately.
24
2. Basic Operation
2.1 Operation panel
Function name
Under this mode, the set value of the displayed parameter number is read
Parameter setting mode
or changed.
Clears and resets parameter settings to the initial values. Calibration
Parameter clear parameters and offline auto tuning parameters are not cleared. For the
details of the uncleared parameters, refer to
Clears and resets parameter settings to the initial values. Calibration
All parameter clear parameters and the offline auto tuning parameters are also cleared. For
the details of the uncleared parameters, refer to
Fault history clear Deletes the fault history.
Identifies the parameters that have been changed from their initial
Initial value change list
settings.
PM parameter Changes the parameter settings required to drive a PM motor to the
initialization settings for V/F control as a batch. (Not displayed for the 575 V class.)
Changes parameter settings as a batch. The target parameters include
Automatic parameter communication parameters for the Mitsubishi Electric human machine
setting interface (GOT) connection and the parameters for the rated frequency
settings of 50/60 Hz.
Group parameter setting Displays parameter numbers by function groups.
0 1 2 3 4
D E F G H
Q R S T U
Description
5 6 7 8 9
I J K L M
V W X Y Z
page 416.
page 416.
A B C
N O P
- _
Refer
to
page
24
408
408
410
409
94
148
75