Installing or Removing the LCC Fan Controller Card
• If a failure occurs during the board boot sequence, the two four-digit alphanumeric LED displays indicate
Installing or Removing the LCC Fan Controller Card
This section contains the following procedures:
Installing a LCC Fan Controller Card
This section describes how to install a LCC fan controller (LCFC) card in the LCC.
Two LCC fan controller cards, shown in the following figure, exist in every LCC.
Note
The CRS-16-LCC-FAN-CT= fan controller card is no longer orderable. Use PID CRS-16-LCC-F-CT-B= to
order a spare fan controller card.
Note
You can have a mix of CRS-16-LCC-FAN-CT= and CRS-16-LCC-F-CT-B= in an LCC.
Cisco CRS Routers 16-Slot Line Card Chassis Installation Guide
138
the current boot phase to assist you in debugging the board failure.
Installing and Removing Line Cards, PLIMs, and Associated Components