Troubleshooting Network Interfaces; Replacing The Fan Tray; Removing The Fan Tray - Cisco AS5350 Installation Manual

Troubleshooting Network Interfaces

Environmental monitor experienced the following events:

Troubleshooting Network Interfaces

For information about isolating problems with the network connections to your Cisco AS5350, refer to
the publication Internetwork Troubleshooting Guide available on the Cisco Documentation CD-ROM.
For more information, see the section "Related Documentation" section on page xii.

Replacing the Fan Tray

Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power
cord.To see translations of the warnings that appear in this publication, refer to the Regulatory
Compliance and Safety Information document that accompanied this device.
Caution Before you remove the fan tray, read the "Safety Recommendations" section on page 21.

Removing the Fan Tray

To remove the fan tray, follow this procedure:
Use the power switch on the chassis to power down the chassis.
Step 1
The fan tray is not hot swappable. You must power down the system before removing the fan tray.
Caution
Cisco AS5350 Universal Gateway Chassis Installation Guide
4-6
Temperature:sensor failed.
Fans:monitor dropped.
Temperature:warning.
Temperature:sensor recovered.
Fans:monitor recovered.
Fans:normal.
Temperature:critical.
Temperature:shutdown.
Chapter 4 Troubleshooting
78-10754-03 0A