Prerequisites; Required Tools And Equipment - Cisco SRS Series Installation Manual

Prerequisites

Figure 62: MSC Slot Impedance Carrier
Prerequisites
Before performing this task, open the cosmetic doors (if installed) and ensure that the slot in which you are
about to install the impedance carrier is empty. See
Removing an MSC, FP, or LSP Line Card, on page
slot in which you are installing an impedance carrier).

Required Tools and Equipment

• ESD-preventive wrist strap
• Large Phillips screwdriver
• Impedance carrier:
Cisco CRS Routers 16-Slot Line Card Chassis Installation Guide
116
• MSC impedance carrier—Cisco Product number CRS-MSC-IMPEDANCE=
Installing and Removing Line Cards, PLIMs, and Associated Components
About Impedance Carriers and Slot Covers, on page
134, or Removing a PLIM, on page 158
108,
(depending on the