Obtaining Documentation And Submitting A Service Request - Cisco SRS Series Installation Manual

Obtaining Documentation and Submitting a Service Request

Date
July 2011
April 2011
December 2010
October 2010
September 2010
January 2010
May 2008
February 2008
July 2007
January 2007
April 2006
December 2005
July 2005
July 2004
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service
request, and gathering additional information, see What's New in Cisco Product Documentation, at:
http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Cisco CRS Routers 16-Slot Line Card Chassis Installation Guide
xviii
Change Summary
Added new modular configuration AC cord clamps. Added information about new CRS-LSP
Label Switch Processor (LSP). Technical updates and minor editorial changes were also
made.
Added information about new CRS-16-PRP-6G and CRS-16-PRP-12G Performance Route
Processor (PRP) cards. Technical updates and minor editorial changes were also made.
Updated document with technical corrections and updates to grounding and modular
configuration power sections.
Added information about the new MSC140 and FP140 line cards; FQ123-140G switch
fabric card; 20-port, 14-port, 8-port, and 4-port 10-GE XFP PLIMs; and the 1-port 100-GE
CFP PLIM. Minor editorial and technical changes were also made.
Added new procedures on installing and removing modular configuration power
components.
Added new procedures for installing and removing a new trough and cut-out plate.
Added new procedures on installing and removing a pillow block.
Updated document with technical corrections.
Made technical updates to power components chapter.
Added a description of the input-power-present LEDs. Added "Installing the Inlet Grille
Screen," "Installing the Exhaust Bag and Removing Exterior Cosmetic Components."
Removed Chapter 2, "Unpacking and Securing the Line Card Chassis" , transferred the
information to the Cisco CRS 16-Slot Line Card Chassis Unpacking, Moving, and Securing
Guide
Updated Chapter 2, "Unpacking and Securing the Line Card Chassis" to include information
supporting the new dolly design.
• Added multishelf information to document.
• Updated Chapter 2, "Unpacking and Securing the Line Card Chassis" to include the
alternate mounting outrigger kit installation information.
• Updated Installing and Removing Exterior Cosmetic Components to include
information about the new rear cosmetic kit.
Initial release of the document
Preface