Removing A Modular Configuration Power Module - Cisco SRS Series Installation Manual

Installing and Removing Power Components
Figure 48: Securing the PM to the Shelf
Step 4 Fill the power shelf to the required configuration.
What to do next
After the modular configuration PMs are installed in the chassis, install power module slot covers in empty
PM slots, if any. For more information, see

Removing a Modular Configuration Power Module

This section describes how to remove a PM from a modular configuration power shelf.
Removing a Modular Configuration Power Module
Installing a Power Module Slot
Cisco CRS Routers 16-Slot Line Card Chassis Installation Guide
Cover.
87