Beeper And Led Sequences And Meaning; Scanner Led Sequences And Meaning; Base/Access Point Led Sequences And Meaning; Base Power Communication Indicator - Honeywell Xenon 1900 User Manual

Beeper and LED Sequences and Meaning

The scanner contains LEDs on the rear of the unit that indicate linking status, decoding state, and battery condition. The base
has LEDs on the top of the unit that indicate its power up, communication, and battery charge condition. The red LED = error;
green LED = success of any type. Scanners and the CCB01-010BT base have audible indicators as well: 1 razz or error tone =
error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indication, beeps, and vibrations for the scanner.

Scanner LED Sequences and Meaning

LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking

Base/Access Point LED Sequences and Meaning

The base contains a red LED and the Access Point has a blue LED that indicate the status of the unit and verifies its com-
munication with the host system. The base also has a green LED that indicates scanner battery charge condition.
Red or Blue LED
Off
On continuously
Short blinks in multiple pulses. Occurs while transferring data to/
from the RF module or the Host port.
Green LED
Off
Slow flash, 1 second on, 1 second off
On continuously
Fast flash, 300 mSec on, 300 mSec off

Base Power Communication Indicator

To display the power indicator on a base or an Access Point, scan the Base Power Communication Indicator On bar
code. To turn off the power indicator, scan the Off bar code. Default = On .
* Base Power Communication
Indicator On
Beeper Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Red or Blue LED - Host Communication
Green LED - Scanner Battery
(base only, does not apply to Access Point)
Vibrate Indication Cause
None Battery low
None Successful communication or linking
None Failed communication
2 vibrations Successful menu change
1 long vibration Unsuccessful menu change
Communication Condition
USB suspend
Power on, system idle
Receiving data
Charge Condition
Battery not detected or charge suspended
Pre-charge and charging
Charge complete
Charge Error
3 - 5