Getting Started; Power Supply Assembly (If Included) - Honeywell Voyager XP 1472g Series Quick Start Manual

Note: Refer to your user's guide for information about cleaning
your device.
For localized language versions of this document, go to
www.honeywellaidc.com.

Getting Started

Turn off the computer's power before connecting the base, then
power up the computer once the base is fully connected. When
the base is connected and powered up, put the scanner in the
base to establish a link. The green LED on the base flashes to
indicate the scanner's battery is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.