Power On/Off Submenu - Fujitsu primergy TX150 User Manual

8.2.9 Power On/Off Submenu

Use this submenu to configure power On/Off settings.
Main Advanced
Power-on Source
Remote:
LAN:
Wake up Timer:
Wake up Time:
Wake up Mode:
Power-off Source
Software:
Power Button:
Power Failure Recovery:
F1 Help
Exit
Esc
Item
Power On Source
Remote
LAN
Wake Up Timer
Wake Up Time
Wake Up Mode
Power Off Source
Software
Power Button
Security Server
Power On/Off
[Bios Controlled]
[Enabled]
[Enabled]
[Disabled]
[00:00:00]
[Dally]
[Enabled]
[Enabled]
[Previous State]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Power On/Off Submenu
Setting
BIOS Controlled
(Unchangeable)
• Disabled (Initial value)
• Enabled
• Disabled
• Enabled (Initial value)
• Disabled (Initial value)
• Enabled
Sets the startup time when using [Wake Up Timer].
• Daily (Initial value)
• Monthly
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
PRIMERGY TX150 S4 User's Guide
Exit
Item Specific Help
F9 Mod. Defaults
Sub-Menu F7 Previous Values
Description
Configures the power-on setting.
Sets whether or not the power is turned on when
the modem (connected to the serial port) receives
a ring signal.
Sets whether or not to enable the power to be
turned on via LAN.
Sets whether or not the power is turned on at a
certain time or after a certain time has passed. A
separate program is necessary for setting startup
time.
Sets the following items if [Wake Up Timer] is
set to [Enabled].
Sets the startup mode when using [Wake Up
Timer].
Sets dates in [Wake up Day] if [Daily] is selected.
Sets whether or not to enable the power to be
turned off using a program or the operating
system.
Sets whether or not to allow the use of the power
switch for turning the power off, when the ACPI
function is disabled.
8
229