Peripheral Configuration Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.6 Peripheral Configuration Submenu

Appears when [Peripheral Configuration] is selected from the [Advanced] menu.
Configures the serial port, parallel port, etc.
Peripheral Configuration
Serial:
Serial Multiplexer:
Floppy Type:
Diskette Controller:
Mouse Controller:
F1 Info
Exit
Esc
Item
Serial
Serial Multiplexer
Floppy Type
Diskette Controller
Mouse Controller
216
PhoenixBIOS Setup Utility
Advanced
[Auto]
[System]
[Local]
[Enabled]
[Auto Detect]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled
• Enabled
• Auto (at the time of
purchase)
• System (at the time of
purchase)
• BMC
• Shared
Local (Fixed parameter)
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled
• Auto Detect (at the time of
purchase)
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
Sets whether to enable or disable the serial port.
Changes the function of the serial port.
• System
Uses as a serial port. (Setting for UPS
connection)
• BMC
Enables the remote control function.
"Appendix C Remote Control Function and
Console Redirection" ( pg.297)
This value can be selected when [Serial] is set to
[Disabled].
• Shared
[System] can be switched to and from [BMC]
automatically. The remote control function and
console redirection can be used together.
Sets when the internal floppy disk drive is used.
Sets whether to enable or disable the floppy disk
controller.
Sets whether or not to use the mouse connected to
the mouse connector.