Peripheral Configuration Submenu - Fujitsu Primergy RX100 S2 User Manual

Chapter 8 Hardware Configuration/Utilities
Item
S-ATA Interface
S-ATA Mode
LSI SATA RAID

8.2.6 Peripheral Configuration Submenu

Appears when [Peripheral Configuration] is selected from the [Advanced] menu.
Configures the serial ports, parallel ports, etc.
Peripheral Configuration
Serial:
Serial Multiplexer:
Floppy Type:
Diskette Controller:
Mouse Controller:
F1 Info
Esc Exit
Item
Serial
Base I/O address
200
table: Items on the Advanced Menu
Setting
Enabled (Fixed parameter)
Legacy IDE (Fixed
parameter)
Disabled (Fixed parameter)
PhoenixBIOS Setup Utility
Advanced
[Disabled]
[BMC]
[Local]
[Enabled]
[Auto Detect]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled (at the time of
purchase)
• Enabled
• Auto
• 3F8/IRQ 4 (at the time of
purchase)
• 2F8/IRQ 3
• 3E8/IRQ 4
• 2E8/IRQ 3
Description
This option is not used by the server.
It can be set when [S-ATA Interface] is set to
[Enabled] and [LSI SATA RAID] is set to
[Disabled]. This option is not used by the server.
It can be set when [S-ATA Interface] is set to
[Enabled]. This option is not used by the server.
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
Sets whether to enable or disable the serial port.
Sets the I/O port address of a serial port.
It is displayed when [Serial] is set to [Enabled].