Standard Ide Submenu - Fujitsu primergy TX150 User Manual

8.2.3 Standard IDE Submenu

Use this submenu to set the type and operating mode for connected IDE devices. When the drives are
installed to Standard IDE Master or Standard IDE Slave, each menu is displayed. Displayed items differ
from drive to drive.
Main Advanced
Standard IDE:
PIO Mode:
DMA Mode:
Password Status:
Change Password:
Help
F1
Exit
Esc
Item
PIO Mode
DMA Mode
Password Status
Change Password
Security Server
[GCR-8483B-(PM)]
PIO 4
UDMA 2
Not Supported
[Press Enter]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Standard IDE Submenu
Setting
PIO 4
UDMA 2
Not Supported
[Press Enter]
PRIMERGY TX150 S4 User's Guide
Exit
Item Specific Help
All item on this menu
cannot be modified in
user mode. If any
items require changes,
please consult your
system Supervisor.
F9 Mod. Defaults
Sub-Menu F7 Previous Values
Description
Displays the current PIO (Programmed I/O)
transfer mode. The fastest PIO transfer mode
among connected IDE devices is automatically set.
Displays the current DMA (Direct Memory Access)
data transfer mode. The fastest DMA transfer mode
among connected IDE devices is automatically set.
Displays the security information of connected hard
disk. This is not supported.
Sets the hard disk password. If the hard disk
password is set, the password is required to start the
BIOS Setup Utility and the system. This is not
supported.
8
221