Connection Of Optional Devices; Connecting An External Scsi Option - Fujitsu Primergy RX100 S3 User Manual

7.7 Connection of Optional Devices

This section explains the connection of optional devices.

7.7.1 Connecting an External SCSI Option

The following shows connection examples of external SCSI options using SCSI card.
Connection conditions vary depending on examples. See each example.
■ Connecting the Backup Cabinet
Connect the backup cabinet as shown below.
Only a single backup cabinet can be connected to the server.
[Server]
Internal hard disk unit
■ Notes on External SCSI Options
●
SCSI-ID Setting
Note that the settings of each device do not overlap.
●
SCSI Cable
Select appropriate SCSI cables to connect the external SCSI option as usage.
Connector types
VHDCI 68 pin. Half pitch 68 pin
VHDCI 68 pin. Half pitch 68 pin
Ctrl U160 lp
( -1301L)
SCSI cable
PG-CBLS007 / PG-CBLS008 Option)
Baseboard
table: List of SCSI Cables
Length Model
1.8m PG-CBLS007
5m PG-CBLS008
PRIMERGY RX100 S3 User's Guide
PRIMERGY SX10
Backup cabinet
PG-R1BC4
Remarks
Option
Option
7
199