Displaying Mpls Qos Mapping Information - Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual

Configuring the MPLS Module
• Interface number of the outgoing VLAN
• FEC associated with the incoming label
If the detail keyword is specified, the following additional information is displayed:
• Outgoing port number
• Counts of packets and bytes that have been received with the incoming label
• Counts of packets and bytes that have been transmitted with the outgoing label
• LSP type
This command also displays information from the Incoming Label Map (ILM) for
RSVP-TE LSPs.

Displaying MPLS QoS Mapping Information

To display MPLS QoS mapping information, use the following command:
show mpls qos-mapping
Configured mappings for both dot1p-to-exp and exp-to-dot1p are displayed.
3-22 MPLS Module Installation and User Guide