Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 126

Configuring MPLS Layer-2 VPNs
OC-3
SONET
LSR 1
Router ID =
11.0.1.11
Figure 7-4: TLS configuration example using PPP transparent mode
The configuration commands for this example follow.
The following command configures the OC-3 module for slot 1:
configure slot 1 module oc3
The following command creates the VLAN that is used to configure the TLS tunnel for
transparently transporting PPP traffic:
create vlan sonet
The following command adds port 1 of the OC-3 module in slot 1 to the sonet VLAN.
There is a one-to-one mapping between SONET ports and SONET TLS VLANs, so each
SONET TLS VLAN can have only a single SONET port, and no other port, as a
member:
config vlan sonet add port 1:1
7-16
LSR 3
Router ID =11.0.3.11
OSPF backbone area
and
MPLS domain
LSR 2
Router ID =11.0.2.11
OC-3
SONET
LSR 4
Router ID =
11.0.4.11
MPLS Module Installation and User Guide
MPLS_21