Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 144

Configuring Destination-Sensitive Accounting
Table 8-4: Route Map Commands (continued)
Command
config route-map <route-map> <sequence
number> add match [nlri-list
<access_profile> | as-path
[<access_profile> | <as_no> | community
[access-profile <access_profile> |
<as_num:number : number <community>]
| next-hop <ipaddress> | med <number> |
origin [igp | egp | incomplete]]
config route-map <route-map> <sequence
number> [add | delete] set
accounting-index 1 value <bin_number>
config route-map <route-map> <sequence
number> delete match [nlri-list
<access_profile> | as-path
[<access_profile> | <as_no>] | community
[access-profile <access_profile> |
<as_num:number | number <community>]
| next-hop <ipaddress> | med <number> |
origin [igp | egp | incomplete]
config route-map <route-map> add
<sequence number> [permit | deny]
{match-one | match-all}
config route-map <route-map> delete
<sequence number>
create route-map <route-map>
delete route-map <route-map>
show iproute route-map
8-10
Description
Configures a route map match statement.
Specify the following:
route-map — The name of the route map.
sequence number — The statement in the route
map to which the statement is being added.
nlri-list, as-path, community, next-hop,
med, and origin — Specify the type of values that
must be applied using the specified operation
against the corresponding attributes as described in
Table 8-6.
Configures the accounting bin number to be
associated with the specified route map entry. The
accounting index value is always set to 1 for
destination-sensitive accounting.
Deletes a route-map match statement.
Adds a statement to the route map with the
specified sequence number and action. The
sequence number determines the order of the
statement in the route map, and the action specifies
the action to be taken on a successful match
against the statements in the route map.
Deletes a statement from the route map.
Creates a route map statement.
Deletes a route map statement from the route map.
Displays a route map IP routing table.
MPLS Module Installation and User Guide