Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 72

Configuring the Label Distribution Protocol
If you specify the
detail
• Discontinuity time
• Negotiated label distribution
• Next hop address
Configuration Example
The network configuration, shown in Figure 4-1, illustrates how to configure a
BlackDiamond switch to support a routed MPLS network.
9.9.9.0/24
unc
LSR 1
Router ID =11.0.1.11
Figure 4-1: MPLS configuration example
The four switches, labeled LSR 1, LSR 2, LSR 3, and LSR 4, have the same physical
hardware configuration. Each switch contains an F48ti module, a G8xi module, an
MPLS module, and an MSMi module. The switches are all interconnected via Gigabit
4-10
keyword, the following additional information is displayed:
LSR 3
Router ID =11.0.3.11
OSPF backbone area
and
MPLS domain
LSR 2
Router ID =11.0.2.11
12.12.12.0/24
duke
LSR 4
Router ID =11.0.4.11
MPLS Module Installation and User Guide
MPLS_18