Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 167

A Supported MIBs and Standards
This appendix lists the software standards and management information bases (MIBs)
supported in relation to the MPLS module.
For a broader list of the software standards supported by ExtremeWare as a
whole, see the "Supported Standards" appendix in the ExtremeWare Software
User Guide .
Standards Supported for MPLS
The Extreme Networks MPLS implementation complies with the following standards:
• RFC 2212 — Specification of Guaranteed Quality of Service
• RFC 2961 — RSVP Overhead Refresh Reduction Extensions
• RFC 3032 — MPLS Label Stack Encoding
• RFC 3031 — Multiprotocol Label Switching Architecture
• RFC 3036 — LDP Specification
• Martini drafts: draft-martini-circuit-encap-mpls-04.txt and
draft-martini-l2circuit-trans-mpls-08.txt
• RSVP-TE LSP tunnel draft: draft-ietf-mpls-rsvp-lsp-tunnel-09.txt
• Traffic Engineering Extensions to OSPF: draft-katz-yeung-ospf-traffic-06.txt
MPLS Module Installation and User Guide A-1