Displaying The Rsvp-Te Routed Path; Displaying The Rsvp-Te Path Profile; Displaying The Rsvp-Te Lsp - Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual

Configuring RSVP-TE

Displaying the RSVP-TE Routed Path

To display the RSVP-TE routed path, use the following command:
show mpls rsvp-te path {<path_name>} {detail}
This command displays the configuration and status information for MPLS RSVP-TE
routed paths. Information is listed in tabular format and includes the path name, path
endpoint LSR IP address, and local VLAN (if configured). If the path endpoint is
specified as a host name, the host name and the DNS resolved IP address are both
displayed. If a specific path name is specified, only information for the specified path is
displayed. If you specify the optional keyword, the list of subobjects specified
detail
for the explicit route object and any LSPs that are configured to use the path are
displayed.

Displaying the RSVP-TE Path Profile

To display the RSVP-TE path profile, use the following command:
show mpls rsvp-te profile {<profile_name>}
By default, this command displays all configured profile parameters for the specified
profile. If the profile name is omitted, the profile parameter values for all configured
LSP profiles are displayed.

Displaying the RSVP-TE LSP

To displays the RSVP-TE LSP, use the following command:
show mpls rsvp-te lsp {<lsp_name>} {detail}
This command displays the configuration and status information for RSVP-TE LSPs.
Information is listed in tabular format and includes the LSP name, LSP state, active path
name, bandwidth requested, bandwidth actually reserved, ERO flag, egress LSR, LSP
up-time, and RSVP error codes (if LSP setup failed). If you specify a specific LSP name,
only information for the specified LSP is displayed. If you specify the optional
detail
keyword, additional information is displayed for each LSP. The detailed information
includes a list of all configured paths, including the path state, error codes for the LSP
associated with each path, up-time for each LSP, the bound profile name, and a list of
TLS tunnels configured to use the LSP.
MPLS Module Installation and User Guide 5-25