Icmp Commands; Ip Multicast And Flow Redirection Commands - Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual

The
show iproute
table entry. The modified syntax of the
show iproute {priority | vlan <name> | permanent | <ipaddress> <mask> |
origin [direct | static | blackhole | rip | bootp | icmp | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 | ospf-extern2 | te] |
route-map <route_map> | summary] {mpls} {sorted}

ICMP Commands

The implementation of the following commands has been augmented to support the
MPLS module:
•
enable icmp unreachables {vlan <name>}
•
disable icmp unreachables {vlan <name>}
•
enable icmp redirects {vlan <name>}
•
disable icmp redirects {vlan <name>}
•
enable icmp time-exceeded {vlan <name>}
•
disable icmp time-exceeded {vlan <name>}
•
unconfig icmp

IP Multicast and Flow Redirection Commands

The IP multicast and flow redirection commands are supported in conjunction with
MPLS. IP multicast traffic is flooded on TLS VLANs via the IP multicast FDB. IP
multicast routing is not supported over MPLS LSPs or on TLS VLANs.
MPLS Module Installation and User Guide
command has also been enhanced to include the RSVP-TE route
show iproute

ICMP Commands

command is as follows:
9-7