Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 146

Configuring Destination-Sensitive Accounting
Where the following is true:
• The is the name of the route map.
route-map
• The
sequence number
is being added.
• The , , and
match set
an entry, the statements are sequenced in the order of their operation. The match
statements are first, followed by set, and then goto.
• The ,
nlri-list as-path
specify the type of values that must be applied using the specified operation against
the corresponding attributes as discussed in Table 8-5.
• The
accounting-index
route map as discussed in Table 8-6.
Table 8-5: Match Operation Keywords
Command
nlri-list <access_profile>
as-path [<access_profile> |
<as-no>]
community [<access_profile> |
<community>]
next-hop <ipaddress>
med <number>
origin [igp | egp | incomplete]
Table 8-6: Set Operation Keywords
Command
accounting-index <index> value
<value>
8-12
identifies the entry in the route map to which this statement
keywords specify the operations to be performed. Within
goto
, ,
community next-hop
keyword specifies the bin number assigned to a specific
Description of Change
Matches the NLRI against the specified access profile.
Matches the AS path in the path attributes against the
specified access profile or AS number.
Matches the communities in the path attribute against the
specified BGP community access profile or the community
number.
Matches the next hop in the path attribute against the
specified IP address.
Matches the MED in the path attribute against the specified
MED number.
Matches the origin in the path attribute against the specified
origin.
Description of Change
Sets the accounting bin number for the route-mapped
accounting index. The accounting index value is always set
to 1 for destination-sensitive accounting.
, , , and
med origin weight
MPLS Module Installation and User Guide
keywords