Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual page 89

Table 5-2: RSVP-TE Configuration Commands (continued)
Command
config mpls rsvp-te add lsp <lsp_name> path
<path_name> {<profile_name>} {primary |
secondary}
config mpls rsvp-te add path <path_name>
[<ipaddress> | <host_name>] {from
<local_endpoint_vlan>}
config mpls rsvp-te add profile
<profile_name> {bandwidth <bps>}
{setup-priority <priority>} {hold-priority
<priority>} {retry-timeout <seconds>}
{hop-count <number>} {ping-interval
<seconds>} {metric [<metric> | igp-tracking}
{record [enabled | disabled]}
config mpls rsvp-te delete lsp [<lsp_name> |
all]
config mpls rsvp-te delete path
[<path_name> | all]
config mpls rsvp-te delete profile
[<profile_name> | all]
config mpls rsvp-te lsp <lsp_name> add path
<path_name> {<profile_name>} {secondary |
primary}
config mpls rsvp-te lsp <lsp_name> delete
path <path_name>
config mpls rsvp-te path <path_name> add
ero [ipaddress <ipaddress/masklength> |
<host_name>] {strict | loose} {order
<number>}
config mpls rsvp-te path <path_name> delete
ero [all | ipaddress <ipaddress/masklength> |
<host_name> | order <number>]
MPLS Module Installation and User Guide
Description
Adds an RSVP-TE LSP.
Adds an RSVP-TE routed path.
Adds an RSVP-TE profile.
Deletes an RSVP-TE LSP.
Deletes an RSVP-TE routed path.
Deletes an RSVP-TE profile.
Adds a path to an LSP. If the path is added as
the primary path, the tunnel LSP uses this
path. If the primary path is unavailable, one of
the secondary paths is chosen.
Deletes a path from an LSP.
Adds an IP address to the explicit route object
(ERO) for the specified path name. Up to 64
subobjects can be added to each path. If the
ipaddress is specified as strict, the strict
subobject must be topologically adjacent to the
previous subobject. If specified as loose, the
loose subobject is not required to be topologically
adjacent to the previous subobject. If not
specified, the default subobject type is strict.
Deletes an IP address from the ERO for the
specified path name.
Configuring RSVP-TE
5-15