Configuring LDP
Configuring LDP
This section describes the following tasks:
• Configuring LDP on a VLAN on page 4-6
• Configuring LDP Filters on page 4-6
• Configuring LDP Session Timers on page 4-8
• Restoring LDP Session Timers on page 4-9
• Displaying LDP Peer Information on page 4-9
Commands for LDP
Table 4-1 describes the ExtremeWare commands for configuring and monitoring LDP.
Each command is described in detail in the sections that follow.
MPLS Module Installation and User Guide
4-3