The typical steps used to configure and verify an RSVP-TE LSP are as follows:
1 Configure a path (mandatory).
2 Configure a profile (optional).
3 Configure an ERO for a path (optional).
4 Configure a primary/secondary LSP (mandatory).
5 Add a secondary LSP (optional).
6 Verify LSP status (recommended).
Oxford
University
Figure 5-2: RSVP-TE Configuration Example
MPLS Module Installation and User Guide
Router ID 1.0.0.0
172.25.23.8/30
Glasgow
Router ID
2.0.0.0
Router ID 5.0.0.0
London
Birmingham
Liverpool
Configuration Example
Oxford
University
Router ID
4.0.0.0
MPLS_24
5-27