Ospf Commands; Bgp Commands; Route Map Commands - Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual

Additional MPLS Module Support Topics

OSPF Commands

The commands described in Table 9-3 have been added to control whether a route for
the OSPF router ID is distributed by OSPF.
Table 9-3: New OSPF Commands
Command
enable ospf originate-router-id
disable ospf originate-router-id
The implementation of the
support automatic advertisement of a label mapping for the OSPF router ID. A label is
advertised for the OSPF router ID regardless of whether OSPF distributes a route for the
router ID IP address in its router LSA.

BGP Commands

The output of the
show bgp route detail
information about MPLS LSPs associated with the routes.

Route Map Commands

MPLS uses route map-based filters for controlling label advertisement and label
propagation. The implementation of the
has been augmented to support the MPLS module.
9-8
Description of Change
Enables distribution of a route for the OSPF router ID in the
router LSA. When enabled, OSPF includes a link with the
router ID IP address and a mask of 255.255.255.255 in the
router LSA. The link type is stub and the metric is 0. By
default, distribution of a route for the OSPF router ID is
disabled.
Disables distribution of a route for the OSPF router ID.
When disabled, OSPF does not include a link with the router
ID IP address in the router LSA.
config ospf routerid
command has been enhanced to include
delete route-map <route-map>
command has been augmented to
MPLS Module Installation and User Guide
command