Configuring Access Profiles; Summary Of Access Policy Commands - Extreme Networks BlackDiamond 6800 MPLS Installation And User Manual

Configuring Access Profiles

Configuring Access Profiles
Destination-sensitive significance is assigned to specific accounting bin numbers
through ExtremeWare commands. To configure accounting route map access
route-map
policies, it may be necessary to define an access profile. This section describes
commands used to configure access profiles for MPLS modules.
This section provides information on the following topics:
• Summary of Access Policy Commands on page 8-3
• Creating an Access Profile on page 8-5
• Configuring an Access Profile Mode on page 8-6
• Adding an Access Profile Entry on page 8-6
• Deleting an Access Profile Entry on page 8-8
• Removing a Routing Access Policy on page 8-8

Summary of Access Policy Commands

Table 8-2 describes the commands used to configure routing access policies that support
the accounting function.
MPLS Module Installation and User Guide 8-3