Restore Default Value - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

Restore Default Value

The Restore Default Value command allows you to reset all of the Multi-View
KVMP™ Switch's settings back to the default. Type your command in the
following format:
Command + Control + [Enter]
Command
redefault
Control
on
For example, to restore all Multi-View KVMP™ Switch settings back to the
default, type the following:
redefault on [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
102
Restore Default Value Command
Enable restore default values
Description
Description