ATEN CM1284 User Manual page 63

Hotkey
[V] [n] [Enter]
General [F1] [Enter]
Settings
[F2] [Enter]
[F3] [Enter]
[F4] [Enter]
[F5] [Enter]
[F6] [nn] [Enter]
[F10] [Enter]
[B] [Enter]
[E] [Enter]
Configure the EDID (n) for the KVM Switch.

n = 1 (Uses the EDID of the monitor connected to
Port 1.)

n = 2 (Uses the EDID of the monitor connected to
Port 2. This setting is supported by CM1284 only.)

n = 3 (Sets the EDID to Remix mode, with which the
Multi-View KVMP™ Switch uses the optimum
EDID.)

n = 4 (Sets the EDID to FHD which is 1920 x 1080
@60Hz.)

n = 5 (Sets the EDID to 4K UHD which is 3840 x
2160 @30Hz. This setting is supported by CM1284
only.)

n = 6 (Sets the EDID to 4K DCI which is 4096 x
2160 @30Hz. This setting is supported by CM1284
only.)
Enables the operating system to SPC.
Enables Mac keyboard emulation.
Enables Sun keyboard emulation.
List the current settings of the Multi-View KVMP™
Switch. To use this function, open a text editor or word
processor, and place the cursor in the page window
before invoking the HSM and enter the hotkey.
Reset USB devices. If any USB devices lose focus or
connectivity, a USB reset may solve the issue.
[n] sets the keyboard language:

n = 08 (French)

n = 09 (German)

n = 15 (Japanese)

n = 33 (English)
Enables Windows keyboard emulation. This is the
default setting.
Enable or disable the beeper.
Enable or disable Power On Detection with which the
Multi-View KVMP™ Switch switches to the next
powered-on computer when a computer that has KVM
focus is powered off.
Chapter 4. Hotkey Operation
Function
51