Power On Detection - ATEN CM1284 User Manual

Power on Detection

The Power on Detection command allows you to enable/disable the power on
detection feature. Type your command in the following format:
Command + Control + [Enter]
Command
pod
Control
on
off
For example, to enable power on detection, type the following:
pod on [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Power on Detection Command
Enable power on detection function
Disable power on detection function
Chapter 6. RS-232 Operation
Description
Description
99