Table of Contents
Advertisement
RS-232 Commands
This section lists the RS-232 commands and provides information on
command syntax.
Verification Messages
Refer to the following table for details on verification messages that appear in
the command line after entering a command.
Verification Message
Command OK
Command incorrect
NOT Login
login OK
login FAIL
SETTING OK
SETTING FAIL
Command or parameter is correct.
Command or parameter is incorrect.
Command sent without RS-232 login.
Password correct and login successful.
Incorrect password.
Some commands support the "save" parameter, so when you
input "save" the system will check all current input commands
and parameters, and a feedback message of "SETTING OK"
will return if all commands and parameters are correct.
Otherwise the system will return a "SETTING FAIL" message.
Some commands support the "save" parameter, so when you
input "save" the system will check all current input commands
and parameters, and a feedback message of "SETTING FAIL"
will return if a command or parameter is incorrect.
Chapter 6. RS-232 Operation
Description
69
Advertisement
Table of Contents
