Restore Default Value - ATEN CM1284 User Manual

TM
Multi-View KVMP Switch User Manual

Restore Default Value

The Restore Default Value command allows you to reset all of the Multi-View
KVMP Switch's settings back to the default. Type your command in the
TM
following format:
Command + Control + [Enter]
Command Description
redefault Restore Default Value Command
Control Description
on Enable restore default values
For example, to restore all Multi-View KVMP Switch settings back to the
TM
default, type the following:
redefault on [Enter]
Note: Each command string can be separated with a space.
94