Picture In Picture - Dual - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

Picture in Picture - Dual

A dual PiP view shows 2 computers on the monitor with one as the main
display, and the other overlapping the main display in an inset window.
Method
Front Panel Press Select to cycle through display
modes.
IR Remote Press the PiP2 button.
Control
Quick Access Move the mouse to the top center of
Toolbar the OSD to display the Quick Access
Toolbar, and then select from the Quick
Access Toolbar.
Note: Hardware Cursor Mode must be
enabled, see The OSD Menu, page 59.
Hotkey Enter the illustrated hotkeys. See The
Hotkey Setting Mode, page 48 for
hotkey instructions.
OSD Menu
In the OSD, click
Access Toolbar, go to Display >
Multiview Mode, and then select PiP2.
Note: You may need a password to
access the OSD Menu. For details, see
Password Protection, page 60.
38
Action
from the Quick
Description