Hotkeys List - ATEN CM1284 User Manual

Hotkeys List

Hotkey
Port [Enter]
Switching
[Port ID] [Device]
[Enter]
[Station ID] [Port
ID] [Device]
[Enter]
Switch the focus of all the devices, including KVM, USB
hub and audio to the next computer.
(Port 1 to Port 2, Port 2 to Port 3, Port 3 to Port 4, and
Port 4 to Port 1.)
Switch the focus of the KVM, USB, and/or audio
(microphone and speakers) to the specified computer in
a single station setup.
[Port ID] specifies the target computer:

When [Port ID] is omitted, the CM1164A/CM1284
switches to the specified device on the next
computer device.

[Port ID] = 1, 2, 3, or 4
[Device] specifies the focused device:

[Device] = K or omitted (KVM)

[Device] = U (USB hub)

[Device] = S (Microphone and speakers)
To switch two or all three devices to a computer at the
same time, type the [Device] keys. For example, [Port
ID] [K] [U] will switch the KVM and USB hub focus to the
specified port.
Switch the focus of the KVM, USB, and/or audio to the
specified computer in a daisy-chained setup.
[Station ID] and [Port ID] specify the target computer:

When [Station ID] is omitted, the CM1164A/CM1284
targets the computer at the next station.

[Station ID] = 1, 2, 3, or 4

[Port ID] = 1, 2, 3, or 4
[Device] sets the focused device:

[Device] = K or omitted (KVM)

[Device] = U (USB hub)

[Device] = S (Microphone and speakers)
To switch two or all three devices to a computer at the
same time, type the [Device] keys. For example,
[Station ID] [Port ID] [K] [U] will switch the KVM and
USB hub focus to the specified port.
Chapter 4. Hotkey Operation
Function
49