Multi-View KVMP™ Switch User Manual
Set Operating System
The Set Operating System command allows you to set the operating system for
a port. Type your command in the following format:
Command + Control + Control1 + [Enter]
Command
os
Control
px
Control1
auto
mac
sun
spc
For example, to change port 3's operating system to Mac, type the following:
os p3 mac [Enter]
For example, to change port 2's operating system to Auto Detect, type the
following:
os p2 auto [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
86
Set Operating System Command
p: Port number, x= 1~4
Example: p2
Change operating system to Windows
Change operating system to Mac
Change operating system to Sun
Change operating system to SPC (Linux)
Description
Description
Description