Osd Hotkey - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

OSD Hotkey

The OSD hotkey command allows you to change the hotkey used to invoke the
OSD. Type your command in the following format:
Command + Control + [Enter]
Command
osdkey
Control
scroll
ctrl
For example, to change the OSD invoke key to [Scroll] + [Scroll], type the
following:
osdkey scroll [Enter]
For example, to change the OSD invoke key to [Ctrl] + [Ctrl], type the
following:
osdkey ctrl [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
98
OSD hotkey command
Change OSD invoke key to: [Scroll] [Scroll]
Change OSD invoke key to: [Ctrl] [Ctrl]
Description
Description