Station - ATEN CM1284 User Manual

Multi-View KVMP™ Switch User Manual

Station

The Station command allows you to switch the console focus to the next station
in a daisy chain setup. Type your command in the following format:
Command + Control + Number + [Enter]
Command
station
Control
id
Number
x
For example, to switch the console to station 2 of a daisy chain, type the
following:
station id2 [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
90
Station Command
Station ID
Station number of switch in daisy chain, x= 1~4
Description
Description
Description