Daisy-Chained Boundless Switching - ATEN CM1284 User Manual

Daisy-Chained Boundless Switching

The daisy-chained boundless switching command allows you to move
hardware cursor across display when they are daisy-chained. Type your
command in the following format:
Command + Control + [Enter]
Command
dlayout
Control
row
quarter
tier
For example, to set a row layout for the daisy-chained boundless switching,
type your command in the following format:
dlayout row [Enter]
Note: 1. Each command string can be separated with a space.
2. The maximum number of station is 4.
3. For more information, see Multiview Monitor Layout Rule, page 33.
4. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Daisy-Chained Boundless Switching Command
Sets a row layout for daisy-chain monitors
Sets a quarter layout for daisy-chained monitors
Sets a tier layout for daisy-chained monitors
Chapter 6. RS-232 Operation
Description
Description
77