Table of Contents
Advertisement
Switching
The Multi-View KVMP™ Switch supports group switching and independent
switching:
Group switching: switches to the KVM (keyboard, video, mouse), audio,
and USB sources of one computer.
Independent switching: switches to KVM (keyboard, video, mouse),
stereo audio, and USB sources independently, on different computers. This
allows you to work on one computer (KVM), access the audio on another
(stereo audio), and connect to peripheral devices on a third (USB).
Note: By default, the CM1284's Display 2 shows a video that is shown on
Display 1, or of the focused video on Display 1 when Display 1 is in
a multi-view mode. To have Display 2 show video of a particular
computer regardless of the focused video on Display 1, configure
the Display B Status setting in the OSD.
Front Panel Pushbuttons
Use the KVM Port Selection and Mode pushbuttons located on the front panel
to switch KVM, audio, and/or USB focus. The selected devices are indicated
with LEDs on the front panel. For more information about LED indicators, see
LED Display, page 30.
LED
1
To switch KVM, stereo audio, and USB focus to a computer, press the
KVM Port Selection pushbutton that corresponds to the computer you
want to access.
To switch KVM access to a computer, press Mode 2 times, and then press
the KVM Port Selection pushbutton that corresponds to the computer.
MODE
3
2
KVM Port Selection
Chapter 3. Basic Operation
4
29
Advertisement
Table of Contents
