Firmware Upgrade - ATEN CM1284 User Manual

Firmware Upgrade

The Firmware Upgrade command allows you to enable the firmware upgrade
mode. Type your command in the following format:
Command + Control + [Enter]
Command
upgrade
Control
on
For example, to enable firmware upgrade mode, type the following:
upgrade on [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
For a detailed procedure on firmware upgrades, see Firmware Upgrades,
page 109.
Firmware Upgrade Command
Enable firmware upgrade mode
Chapter 6. RS-232 Operation
Description
Description
103