Quad View - ATEN CM1284 User Manual

Quad View

A quad view displays four computers on the monitor in equal sized windows.
Method
Front Panel Press Select to cycle through display
modes.
IR Remote Press the Quad button.
Control
Quick Access Move the mouse to the top center of the
Toolbar OSD to display the Quick Access Toolbar,
and then select from the Quick Access
Toolbar.
Note: Hardware Cursor Mode must be
enabled, see The OSD Menu, page 59.
Hotkey Enter the illustrated hotkeys. See The
Hotkey Setting Mode, page 48 for hotkey
instructions.
OSD Menu
In the OSD, click
Access Toolbar, go to Display >
Multiview Mode, and then select Quad.
Note: You may need a password to
access the OSD Menu. For details, see
Password Protection, page 60.
Action
from the Quick
Chapter 3. Basic Operation
Description
37